 Products |
 Reviews |
 Limited Warranty |
 Purchase |
 Contact Us |
 Home |
Model 860 Stereo Power Amplifier
 | Specifications |
| Audio Signal Path | |
| Input Impedance | |
| Unbalanced | 20k Ohms |
| Balanced | 600 Ohms |
| Max Input Level | +6dB (1.5V RMS) |
| Channel Separation | > 110dB |
| Voltage Gain | 26dB |
| Sensitivity | 1.42V RMS for rated output |
|
Power Bandwidth (frequency response) |
5Hz - 30kHz (+0, -1 dB) |
| Slew Rate | > 50V/usec |
| Max Output Level | +32dB (30V RMS) |
| Signal to Noise Ratio | > 110dB |
| Noise | < -80dB |
| Distortion (THD +N) | < .05% at rated output |
| Damping Factor | > 100 |
| Coupling | DC with 3Hz Servo Amp |
| Output Drivers | 6 matched MOS-FETs per channel |
| Output Power | |
| 8 Ohm load | 100W (per channel) |
| 4 Ohm load | 190W (per channel) |
| Power Requirements | |
| Input Voltage | 100, 115, 200, or 230 VAC (programmable) |
| Input Frequency | 50 - 60Hz |
| Max Power Requirement | 1,000VA |
| Connection | Molded 3-wire cordset, 6ft. (removable) |
| Protection | Fuse (user accessible); Fault sensing circuitry which continually monitors temperature, output DC voltage, supply current and Line voltage, and automatically mutes input and output when fault is detected. |
| Transformation | Custom 1,000VA Toroid |
|
Supply Rail Filtering (energy storage) |
98,000uF each channel |
| Physical | |
| Dimensions | 6 1/8 x 14 3/4 x 19 inches (overall) |
| Weight | 40 pounds (net) |
| Finish | Anodized Aluminum |
| Panel | Choice of Gold, Silver, or Black |
| Warranty | Limited 3 Years Parts and Labor |
 Top |