 Products |
 Reviews |
 Limited Warranty |
 Purchase |
 Contact Us |
 Home |
Model 960 Stereo Power Amplifier
 | Specifications |
| Audio Signal Path | |
| Input Impedance | |
| Unbalanced | 20k Ohms |
| Balanced | 600 Ohms |
| Max Input Level | 4V RMS (+14dB) |
| Channel Separation | > 110dB |
| Voltage Gain | +26dB |
| Sensitivity | 1.75V RMS for rated output |
|
Power Bandwidth (frequency response) |
5Hz - 40kHz (+0,-1dB) |
| Slew Rate | > 100V/usec |
| Max Output Level | 43.2V RMS (+33dB) |
| Signal to Noise Ratio | > 106dB |
| Noise Floor | < -74dB |
| Distortion (THD +N) | < .02% at rated output |
| Damping Factor | > 100 |
| Coupling | DC with 3Hz Servo Amp |
| Output Drivers | 12 matched MOSFETs per channel |
| Output Power | |
| 8 Ohm load | 200W (per channel) |
| 4 Ohm load | 400W (per channel) |
| 2 Ohm load | 580W |
| Power Requirements | |
| Input Voltage | 100, 115, 200 or 230 VAC (programmable) |
| Input Frequency | 50 - 60Hz |
| Max Power Requirement | 1,600VA |
| Connection | Molded 3-wire cordset, 6ft. (removable) |
| Protection | Fuse (user accessible); Fault sensing circuitry which continually monitors operating temperature, output DC voltage, supply current and Line voltage, and automatically mutes input and output when fault is detected. |
| Transformation | Custom 1.6kVA Toroid |
|
Supply Rail Filtering (energy storage) |
188,000uF each channel |
| Physical | |
| Dimensions | 8.00 x 22.25 x 19.00 |
| Weight | 70 pounds (net) |
| Finish | Anodized Aluminum |
| Panel | Choice of Gold, Silver, or Black |
| Warranty | Limited 3 Years Parts and Labor |
| Displays (per channel) | |
| VU Bar Graph | |
| Mute Indicator | |
| Clip Indicator | |
| DC Fault Indicator | |
| Over Temperature Indicator | |
 Top |